ISO 10825-1:2022

مواصفة قياسية دولية   الإصدار الحالي
· اعتمدت بتاريخ 25 مايو 2022 ·

Gears — Wear and damage to gear teeth — Part 1: Nomenclature and characteristics

ملفات الوثيقة ISO 10825-1:2022

null صفحات
الإصدار الحالي

مجال الوثيقة ISO 10825-1:2022

This document provides nomenclature for general modes of gear tooth wear and failure. It classifies, identifies, and describes the most common types of failure and provides information that, in many cases, enables the user to identify failure modes and evaluate the degree or change from original condition.

This document is based on experience with steel gears; however, many of the failure modes discussed apply to gears made from other materials. Not all failure modes that can occur on other types of gears, such as plastic, bronze, or powder metal gears, are included.

The solution to many gear problems requires detailed investigation and analysis by specialists and is beyond the scope of this document.

This document specifies only the terminology intended to help with the identification and reporting of the appearance and conditions of gears after a period of operation. Neither causes nor preventive measures for any condition described are discussed.

In this document, gear refers to both gear wheels and pinions, unless the gear is specifically identified.

This document does not define “gear failure”.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 2055-1:2015
GSO 2055-1:2015 
مواصفة قياسية عمانية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO/PAS 8329:2024
 
مواصفة قياسية دولية
Extended master connection file (χMCF) — Description of mechanical connections and joints in structural systems
IWA 45:2024
 
مواصفة قياسية دولية
Sustainable critical mineral supply chains
ISO/TS 5462:2024
 
مواصفة قياسية دولية
Rubber latex coated fabric gloves — Specification
ISO 19085-9:2024
 
مواصفة قياسية دولية
Woodworking machines — Safety — Part 9: Circular saw benches (with and without sliding table)